EXFO FBP-HD1 Fiber Inspection System w 200X FBP Probe Microscope HD1 Display

Description

ebay template
The Following Items Are Included:
EXFO FBP-HD1 Hand-Held Display Unit (BC# 13038-L/T*)
EXFO FBP 200X Probe Microscope
Tempo Model 948 Reel Cleaner
AC Adapter / Charger
Roll of White Tape
Hard Copy User Manual
Carrying Case
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
EXFO FBP-HD1 Hand-Held Fiber Inspection Display Unit With
EXFO FBP 200X Probe Microscope
Inspect installed connectors that are located inside hardware devices without accessing the "backside" of patch panels.
Includes Carrying Case And Accessories As Listed Above!
Working Condition: Excellent
Condition: Refurbished
Warranty: 90 Day Exchange Warranty
FBP-HD1
The EXFO/Westover Scientific Video Inspection Probe is a portable, video microscope used to inspect fiber optic terminations. More specifically, the FBP is used to inspect installed connectors that are located inside hardware devices or in the "backside" of patch panels. It eliminates the need to access the backside of patch panels or disassemble hardware devices prior to inspection.
Patch Panels:
Many patch panels feature a design wherein one connector is easily inspected (front), but the other is difficult to access (back). Inspecting the connector on the front side of the panel is commonly performed using a simple fiber inspection microscope. However, the backside connectors are not as easily inspected with traditional microscopes, thus requiring time consuming troubleshooting. The FBP system combines with Westover's line of "Cleaning Sticks" produce a fast and effective means for installing, troubleshooting, or maintaining fiber optic patch panels.
Hardware Devices and Test Equipment:
Most hardware devices feature connectors, at the faceplace of a "box", that lead to the back-plane circuitry. These connectors are very difficult to access since they are built into the device's enclosure. If a contaminates jumper is inserted, the termination
inside
the divice can become contaminated and contribure to signal loss. Many test equipment designs feature the same type of "back plane" fiber wherein a critical fiber termination lies
just inside
a piece of hardware. The FBP "Probe" used in conjuntion with Westover's line of "Cleaning Sitcks" can be used to ensure that the termination inside is clean.
Mil-Aero Connectors:
Most Mil-Aero connectors are based on multiple fiber plugs that embody "Termini" ferrules. Typically, one end of the connector contains multiple "pins" and the other contains multipler "sockets". In either cas, you cannot inspect the terminations with a traditional microscope because you're not able to "look" down inside the sockets. Using the FBP "
Probe
", you are able to access the fiber endfaces, and inspect these connectors fully assembled.
Cable Assemblies:
In addition to inspecting backside connectors through bulkhead adapters, the FBP is available with an adapter tip for inspecting patch cables and cable assemblies.
HD1 Hand-Held Display
Bright, hight contrast 2.5" TFT active matric LCD Display. The probe's hight magnification projects a 530-micron field onto the LCD display. The
Auto-Shutoff Interval
switch can be set to one of three settings: 10 sec., 30 sec., or Infinity. Pressing the
On/Off
switch will turn the LCD display On for the set interval time. Pushing the switch again, turns Off the display.
Battery Power and Recharge
The display utilizes a NiMH rechargable battery pack. From a full charge, the system can operate continuously for approximately 3 hours. You can ectend the battery life by using one of the two display's Auto-Shutoff Interval settings. The system's "
Low Battery
" indicator signals when the battery runs low. (Approximately 15 minutes before automatic shutdown. After this time, the battery must be recharged.) Use external power (AC power adapter) to charge the battery pack. Typical battery charging time is approximately 2-3 hours.
AC Power
Using the AC power adapter has the following advantages:
Saves internal battery power for portable operation later.
Charges internal battery pack.
Allows extended operation.
The two LED's on the front of the Hand-Held display, indicates the display's AC Power and Battery Power status.
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our
Ebay Test Equipment Store
. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to
contact us
for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale.
Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections)
A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED
Sell Smarter with
Kyozou
.
Inventory and Ecommerce Management